PET Flat Pasting Film Extrusion Line

Igwe ejima pụrụ iche ejima ịghasa extruder maka PET mpempe akwụkwọ extrusion igwe.The otu oyi akwa mpempe akwụkwọ na multi-layers mpempe akwụkwọ, transperent mpempe akwụkwọ na agba akwụkwọ.Igwe extruder ahaziri ahazi.N'ebe a, anyị ga-egosi gị igwe PET extruder maka ngwaahịa ihe nkiri dị larịị.


Nkọwa ngwaahịa

Mkpado ngwaahịa

Vidiyo ngwaahịa

Atụmatụ na Ngwa

Ihe nkiri mado PET dị larịị, bụ nke ihe PET mere.Ọ bụ ihe ịchọ mma ọhụrụ dị mma na gburugburu ebe obibi.Nwere arụmọrụ kwụsiri ike, enweghị mgbawa na nhazi ahụ, nsọtụ agaghị agbawa na akara, ezigbo mgbochi na-eyi, ọ dịghị mfe ịcha.

A gaghị agbanwe ikuku na-egbu egbu na nke na-emerụ ahụ mgbe a na-eji ya.

Ihe nkiri mado ewepụghị PET, nwere agba na-egbuke egbuke, obere mgbanwe agba, na enweghị agba na-ada ada.Ma ejiri ya naanị ya ma ọ bụ yana ihe ndị ọzọ, ihe nkiri mado PET dị larịị nwere ike ime ka ị nwee mmetụta gburugburu ebe obibi dị n'otu na nke jikọtara ọnụ.

A na-ejikarị enyo ụlọ, ụlọ ịsa ahụ, arịa ụlọ, uwe akwa, ihe eji achọ mma, wdg.

Ihe nkiri mpempe akwụkwọ PET dị mfe ihicha, agaghị enwe ọkụ eletrik na uzuzu dị n'elu mgbe ehichapụ ya.

Isi Nka na ụzụ Parameters

Ọdịdị Extruder

Igwe ejima kristal efu efu extruder

Ihe onwunwe

PETG

Ọdịdị mpempe akwụkwọ

Otu akwụkwọ oyi akwa

Obosara

650-1250mm

Ọkpụrụkpụ

0.04-0.08mm

Ike mmepụta

200-500kg / h

Nkọwa zuru ezu

PET Non-cystallization yiri ejima ịghasa extrusion sistemu
crystallizer free & dehumidifier, klaasị ụwa SIEMENS sistemụ arụmọrụ na PLC akara, akpaka plastic PET film extrusion igwe.

  • Extrusion dị elu nke ọma, sistemụ ikuku abụọ, ọ dịghị mkpa dehumidifier na crystallizer, chekwaa ike.
  • Sistemụ oghere dị ike maka extruder, mepụta mpempe akwụkwọ ka mma.
  • Agbazekwa mgbapụta, ihuenyo mgbanwe, anwụ ebu
  • The elu-nkenke ígwè igwe na-akpụ akpụ na roba rola maka ihe nkiri akpụ.Ejiri moto servo na-ebugharị, kwụsie ike karị.
  • Usoro ikuku akpaaka, na-eme ka nchekwa nke mmepụta na oke ọsọ ọsọ.Mbelata ihe nkiri akpaaka, ntinye ihe nkiri akpaaka, ogwe ikuku akpaaka na-agbanwe.
  • Usoro njikwa SIEMENS, nnyefe netwọkụ, nkwado dịpụrụ adịpụ site na ebe ọ bụla.
  • Centralized akara, chọgharịa niile parameters niile akụkụ na otu ihuenyo, dị ka ugbu a, nrụgide, ọsọ, okpomọkụ, wdg na-eme ka ọrụ mfe.

Sistemụ njikwa

CHAMPION MACHINERY bụ onye mbụ mere nyocha wee mepụta ejima ịghasa extruder maka ahịrị extrusion akwụkwọ PET na China.Ihe karịrị 800 PET mpempe akwụkwọ ejima ịghasa extrusion igwe abụrụla nrụpụta kwụsiri ike.

Ihe ohuru ohuru nke teknụzụ anyị: "Isi arụrụ n'ụlọ, nyocha na mmepe na-aga n'ihu".

Usoro nchịkwa nke ụwa-SIEMENS njikwa.Usoro CPU dị elu.Ugboro ugboro, njikwa servo maka ahịrị zuru oke.


  • Nke gara aga:
  • Osote: