ABS/HIPS mpempe akwụkwọ extrusion ahịrị

CHAMPION MACHINERY na-enye igwe ejima ịghasa extrusion dị elu yana igwe otu ịghasa extrusion maka mpempe akwụkwọ ABS.Igwe na-eme mpempe akwụkwọ dị elu dị ebe a.


Nkọwa ngwaahịa

Mkpado ngwaahịa

Vidiyo ngwaahịa

Isi Nka na ụzụ Parameters

Ọdịdị Extruder

Otu ịghasa extruder/ejima ịghasa extruder

Ihe onwunwe

ABS akụrụngwa & ihe eji emegharị ihe mgbe niile

Obosara mpempe akwụkwọ

600-1200mm

Ọkpụrụkpụ mpempe akwụkwọ

0.3-6 mm

Ike

400-1200kg / h

Ngwa

ABS otu oyi akwa mpempe akwụkwọ na multi-layers mpempe akwụkwọ, nwere ndị dị otú ahụ e ji mara dị ka elu mmetụta-eguzogide, elu okpomọkụ-eguzogide, ezi ike siri ike, elu elu roughness, mfe thermoform, wdg N'ọtụtụ ebe na-eji ígwè, eletriki, nkwakọ, ọgwụgwọ ọgwụgwọ, ụgbọ ibu. , ihe egwuregwu ụmụaka, mkpụbelata ụgbọ ala, efere friji, wdg.

ABS eletriki tray
ABS mpempe akwụkwọ extruder maka eletriki mpempe akwụkwọ
ABS efere efere friji
ABS thermoforming mpempe akwụkwọ

Nkọwa zuru ezu

Sistemụ extrusion

  • CHAMPION na-eme ka igwe extruder ahaziri ahaziri dị ka ngwaahịa chọrọ, dị ka otu oyi akwa ABS mpempe akwụkwọ extrusion line, multi-layers ABS extrusion line.
  • Main extruder nwere ụdị abụọ dị iche iche.Otu bụ otu ịghasa extruder, nke ọzọ bụ ejima ịghasa extruder.
  • Independent R&D ejima ịghasa extruder, chepụta Ọdịdị nke ịghasa dabere na dị iche iche ihe.Na plasticizing ka mma, akwụkwọ agba edo edo karịa, extrusion kwụsiri ike, ikike ka ukwuu.Usoro oghere pụrụ iche maka skru ejima, nwere mmetụta na-agwụ ike ka mma.

The mkpa mpempe akwụkwọ na oké efere

  • N'ihe dị iche n'etiti mpempe akwụkwọ na osisi, nhazi nke ahịrị dum dị iche.
  • Họrọ iji winder akpaaka na ahịrị mpempe akwụkwọ.Belata ihe mkpofu sitere na ọrụ aka, ma belata ụgwọ ọrụ, melite arụmọrụ, nchekwa karịa.
  • Mpempe akwụkwọ dị mkpa nke ABS, a na-ejikarị ya na igbe eletriki.
  • Akwa efere nke mpempe akwụkwọ ABS, a na-etinye ya n'ọtụtụ ebe n'ọhịa nke refrjiraeto, ụlọ nke ụgbọ ala / bọs, akpa akwa, wdg.
  • Ngwaahịa ndị ọzọ nke efere ABS/board, biko lelee ozi akụrụngwa nkeABS/PMMA/TPO/EVA osisi extrusion ahịrị.

Usoro njikwa

  • PLC na-achịkwa ahịrị zuru oke.
  • Nabata sistemụ njikwa ugboro / servo na teknụzụ mgbasa ozi ethernet iji nweta arụmọrụ dị elu, nkenke dị elu, nkwụsi ike dị elu na nchekwa dị elu.
  • HMI Centralized njikwa.Site centralized akara, ị nwere ike ịchọgharị niile ozi nke niile akụkụ na otu ihuenyo, dị ka ugbu a, nrụgide, ọsọ, okpomọkụ, agụụ mgbali, wdg Ọ na-eme ka ọrụ mfe.
78dfd5

Nkwakọ ngwaahịa na mbupu


  • Nke gara aga:
  • Osote: